| Ties |
 |
The standoff tie accommodates almost any pitch roof line including valleys. It also makes a stable wall tie and when mounted, will accommodate a 24 inch work platform. |
 |
The V-Brace tie is used in conjunction with the outrigger base, providing a stable rest for the top of the poles. This tie is light and easy to slide up and down the pole, even while on the system. The non-marking bumpers provide cushion for delicate wall surfaces while gripping to the wall for stability. Each v-brace comes with a tie chain and wall anchor bracket for use above 24 feet. This V-brace puts the center of the pole 33 inches from the wall. |
 |
The Extendable V-brace when retracted is the same size as the standard v-brace, or 33 inches from pole center to wall. However, this brace expands 18 inches in 2 inch increments, moving the pole center to wall distance of 51 inches. This assembly also folds for easy storage and comes standard with a 500 lb rated ratchet strap and wall anchor plate. |
 |
This adjustable tie is adjustable from 6 to 9 inches. The all steel design features anchor plates that fasten into bed joints with 4 screws to ensure uniform loading on the anchors. With only 600 lbs of total pullout required per tie, it is easy to mount to most any construction. |
 |
Use various length extensions with the PowerPole® ByPass Wall Tie to increase your distance from the wall. Contact ReechCraft or your local dealer for more information on available sizes. |