ReechCraft PanelJack
Components and Accessories
Aluminum Strongback
The tempered aluminum strongback is lightweight, yet durable—perfect for any residential or commercial job. This strongback can be ordered in full lengths up to 24 ft.
Size: 12 ft – 26 ft
Duty Rating: 300 lb
- Lightweight
- 9/16 in. pinholes every 12 in. for multiple platform levels
- 3/16 in. x 1.5 in. slots 6 in. on center to allow for compression
- Stackable for tall walls
Steel Strongback
This strongback can be ordered in lengths 2 ft, 4 ft, 8 ft, 9 ft, 10 ft and 12 ft.
Available Lengths: 2 ft, 4 ft, 8 ft, 9 ft, 10 ft and 12 ft
Material: Galvanized G90 Steel
- Built to take a beating
- 9/16 in. pinholes every 12 in. for multiple platform levels
- 3/16 in. x 1.5 in. slots 6 in. on center to allow for compression
- Stackable for tall walls
Strongback Coupler
The strongback coupler connects any size aluminum or steel strongback together. This coupler is a steel strap positioned on the outside on the strongback channel. Each strongback coupler is sold as a pair and comes with hardware.
Material: Galvanized G90 Steel
Weight: 5 lb
- Connects any size aluminum or steel strongback
- Positioned on the outside of the strongback channel
Guard Rail
The guard rail supports the top and midrail for worker safety. All PanelJack guard rails attach to the platform bracket receiver.
Material: 1 in. Steel Square Tube
- Supports top and midrail
- Uses a 5/16 in. latch pin to connect to platform bracket
Platform Bracket
The platform bracket supports up to a 22 in. wide deck. Each platform bracket can stack in a trailer or PanelJack transport crate. All PanelJack platform brackets use a single gravity pin assembly to give a fast, easy and consistent setup.
Material: 1.25 in. Steel Square Tube
- Supports up to a 22 in. wide deck
- Holds the steel safety rail in place
- Single 9/16 in. gravity pin for fast, easy and consistent setup
7′-11′ Tall Wall Turnbuckle
The PanelJack Pro System 7 ft to 11 ft turnbuckle allows plumbs walls straight and true. This turnbuckle telescopes from 7 ft to 11 ft by 3 in. increments, which means it can shore walls or ceilings up to 12 ft. All PanelJack turnbuckles use a single, gravity pin assembly to give a fast, easy and consistent setup.
Material: 1.5 in. Steel Square Tube
LINEAR FOOTAGE __________ ÷ 6 FT = NUMBER OF PRO SYSTEMS YOU NEED (AND THEN ADD AN ADDITIONAL ONE FOR EACH CORNER)
- Use with steel or aluminum strongbacks
- Telescopes in 3 in. increments from 7 ft to 11 ft
- Single 9/16 in. gravity pin for assembly to strongbacks
- 8 in. zinc plated exposed ACME thread at bottom
- 6 in. x 8 in. foot plate – the biggest in the industry
- 1 in. stake hole for a variety of floor surfaces
- Easy carrying handles
PanelJack Transporter
The steel transporter holds 20 sets of bracing. They are stackable and come with individual compartments for each piece so that everything is accounted for.
Save time and money on ICF construction projects with the lightweight PanelJack. See how the ReechCraft PanelJack can make work faster, easier and safer!
Strong, safe and adjustable! The Reechcraft PanelJack system is strong, safe, adjustable, versatile and lightweight. The PanelJack bracing system allows me to provide my customer with a straight wall. Your service has been outstanding. Your knowledge and expertise has been helpful on several occasions. When I needed a large order of braces, with less than a week’s notice, you had them delivered in five days. Thanks!